Hand Brake: Description: Replacement

The hand brake is supplied with a pin in position that locks the adjuster spring in the fully compressed condition. This allows the hand brake to be raised to the fully up position with the cables connected, in order to facilitate the assembly of the center console. Subsequent to the assembly of the center console, the pin can be removed and the lever lowered, at which point the adjuster will provide the required cable tension.

A mounting clip is provided, which is clipped to the equalizer and fitted over the ends of the body tubes, in order to provide location while the cables are fed through the body tubes and into the 'quick fit' connections in the equalizer. This allows a 'one man' operation for cable fitment.