Passenger's Switch Test

Remove power window master switch. See WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1. See appropriate POWER WINDOW PASSENGER SWITCH CONTINUITY TEST table.

Fig 1: Passenger Power Window Switch Terminal ID

POWER WINDOW PASSENGER SWITCH CONTINUITY TEST

Position	Terminal Continuity
Off	1 & 3; 2 & 4
Up	1 & 3; 2 & 5
Down	2 & 4; 3 & 5