Integration Relay
- Disconnect integration relay. Using jumper wires, connect battery positive to terminals No. 1 and 7, and battery negative to terminal No. 10 at integration relay. Connect test light between terminals No. 7 and 9. See STEP 1 in illustration. See Fig 1. If test light illuminates and buzzer sounds for 4-8 seconds, go to next step. If operation is not as specified, replace integration relay.
- Repeat step 1. While buzzer is sounding, connect negative lead from battery to terminal No. 8. See STEP 2 in illustration. See Fig 1. Buzzer should stop. Replace integration relay if operation is not as specified.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002