lemon-mirror:
Home >> Lexus >> 2002 >> ES 300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 451 (Power Liftgate System) >> Link Rod >> Installation

Link Rod: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive unit end of the link rod on its mounting sphere by gently pushing straight on.
  2. Push the plastic retainer down to lock the mechanism in position.
  3. Install the D-pillar trim on the vehicle. Refer to D-PILLAR TRIM .
  4. Install the liftgate end of the link rod on its mounting sphere by gently pushing straight on.
  5. Push the plastic retainer down to lock the mechanism in position.
  6. Close the liftgate and check for proper power liftgate operation.
· About lemon-mirror