lemon-mirror:
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Combination Meter >> Removal

Combination Meter: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See AIRBAG SYSTEM ).
  2. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  3. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  4. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  6. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE STEERING COLUMN COVER 
    1. Turn the steering wheel assembly to the right and remove the screw as shown in the illustration.
      Fig 1: Locating Steering Wheel Assembly Screw
      G05252874Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the steering wheel assembly to the left and remove the screw as shown in the illustration.
      Fig 2: Locating Steering Wheel Assembly Screw
      G05252875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 2 claws and remove the steering column cover lower.
      Fig 3: Identifying Steering Column Cover Lower Claws
      G05252876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the claw and remove the steering column cover upper.
      Fig 4: Identifying Steering Column Cover Upper Claw
      G05252877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. Remove the screw.
    2. Disengage the 2 clips.
    3. Disengage the 4 claws and guide, and remove the instrument cluster finish panel sub-assembly.
      Fig 5: Identifying Instrument Cluster Finish Panel Sub-Assembly Claws And Guide, Clips And Screw
      G05252878Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 4 screws.
      Fig 6: Locating Combination Meter Assembly Screws
      G05252879Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 connectors as shown in the illustration.
      Fig 7: Disconnecting Connectors
      G05252880Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the combination meter assembly as shown in the illustration.
      Fig 8: Removing Combination Meter Assembly
      G05252881Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror