Using Techstream
- Connect Techstream to the DLC3.
- Turn the engine switch ON.
- Turn the tester ON.
- Enter the menu items in this order: Chassis / Tire Pressure Monitor / Utility / ID Registration
- Perform the procedures displayed on the tester
- Confirmation of transmitter ID registration: Enter the menu items in this order: Chassis / Tire Pressure Monitor / Data List. Read the "ID Tire Inflation Pressure" values.
NOTE:
It may take up to about 2 or 3 minutes to update the tire pressure data. If the values are not displayed after a few minutes, perform troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25.
NOTE:
If the IDs have not been registered, DTC C2171/71 is set in the tire pressure warning ECU after 3 minutes or more.
NOTE:
The tire pressure information reception condition can also be confirmed through the multi-information display's tire pressure display screen.