lemon-mirror:
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A760H Automatic Transaxle >> Pattern Select Switch >> Inspection

Pattern Select Switch: Inspection

  1. INSPECT PATTERN SELECT SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Switch Condition Tester Connection Specified Condition
      Pattern select switch (PWR) 3 - 7 Below 1 Ω
      Pattern select switch (NORM) 3 - 7 10 kΩ or higher
      Press continuously Pattern select switch (SNOW) 1 - 3 Below 1 Ω
      Release Pattern select switch (SNOW) 1 - 3 10 kΩ or higher

      If the resistance value is not as specified, replace the pattern select switch.

      Fig 1: Identifying Pattern Select Switch Connector
      G05318238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror