Repair and Diagnosis: Electrical: Starter: Starting: Starter: Removal

REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
1. Remove the exhaust manifold RH (See REMOVAL ).
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
- w/ Navigation System:
  After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE STARTER COVER
1. Remove the 3 bolts and starter cover.
  
  Fig 1: Locating Starter Cover Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STARTER ASSEMBLY
1. Disconnect the starter connector.
2. Remove the nut and disconnect the starter wire.
  
  Fig 2: Locating Starter Connector And Starter Wire Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 bolts and starter.
  
  Fig 3: Locating Starter Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the flywheel housing side cover.
  
  Fig 4: Removing Flywheel Housing Side Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002