lemon-mirror:
Home >> Lexus >> 2008 >> RX 350 FWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting >> Ignition Switch >> Removal

Ignition Switch: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE IGNITION SWITCH 
    1. Disconnect the ignition switch connector and unlock warning switch connector.
    2. Remove the clamp.
    3. Remove the 2 screws and ignition switch.
      Fig 1: Identifying Ignition Switch Screws
      G05268533Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror