lemon-mirror:
Home >> Lincoln >> 1995 >> Mark VIII Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Programming >> Remote Transmitter

Remote Transmitter

  1. Turn ignition switch to ON or ON/ACCESSORY position and momentarily short the two terminals of the Program Connector (J4). The Program connector is a 2-pin connector taped to the wire assembly. It is located to the right of the glove box, behind the far right side of the instrument panel. All doors should lock then unlock. Remove shorting terminal.
  2. Press any button on transmitter. All doors should lock then unlock, to verify that transmitter has been programmed. It may be necessary to press button up to 3 times. If doors do not lock and unlock, go to PINPOINT TEST B  .
  3. Go to step  2 to program additional transmitters. Up to 4 transmitters may be programmed.
  4. Turn ignition off. If programming procedure was successful, all doors will lock and unlock. Test operation with each transmitter.
    NOTE: The remote/keyless entry module erases all previous transmitters from memory when the transmitters are programmed or re-programmed. The remote/keyless entry module can store up to four transmitters in memory.
· About lemon-mirror