One-Touch Down Feature Inoperative
- Power Supply To One-Touch Module Check Remove driver's door trim panel. Access module located in driver's door. Turn ignition on. Check Red/Light Blue wire for voltage at module connector. If battery voltage does not exist, repair Red/Light Blue wire. If battery voltage exists, go to next step.
- One-Touch Circuit Ground Check Check resistance between Black wire at one-touch module and ground. If resistance is 5 ohms or less, go to next step. If resistance is greater than 5 ohms, repair open in Black wire. Retest system.
- One-Touch Down Switch Sense Test Actuate driver's window switch for downward operation. Hold button down. If driver's window does not move down, repair power window system. If driver's window moves down, replace one-touch down module. Retest system.