Power Window Single Switch
Remove suspect window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Check for continuity between terminals as specified while operating switch. See SINGLE SWITCH TESTING table. If continuity does not exist as specified, replace switch. See Figure.
SINGLE SWITCH TESTING
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & 5; 2 & 3; 6 & 7 |
| Up | 4 & 6; 2 & 3 |
| Down | 3 & 4; 6 & 7 |