Mirror Control Switch
Remove mirror control switch and disconnect harness connector. Check continuity between mirror control switch terminals with the switch in the appropriate position. See Fig 1 . Refer to the POWER MIRROR SWITCH TERMINAL IDENTIFICATION table. If resistance is not as specified, replace mirror control switch.
POWER MIRROR SWITCH TERMINAL IDENTIFICATION
| Switch Position | Check Between Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 1 & 7; 5 & 6 | |
| Down | 1 & 6; 5 & 7 | |
| Left | 1 & 4; 5 & 6 | |
| Right | 1 & 6; 4 & 5 | |
| Right Mirror | ||
| Up | 1 & 8; 5 & 6 | |
| Down | 1 & 6; 5 & 8 | |
| Left | 1 & 3; 5 & 6 | |
| Right | 1 & 6; 3 & 5 | |