General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricants and Chemicals | |
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP or equivalent | WSS-M2C153-H |
| Motorcraft Silicone Brake Caliper Grease and Dielectric Compound XG-3 or equivalent | ESE-M1C171-A |
| Nickel Anti-Seize Lubricant XL-2 (in Canada CXG-2) or equivalent | ESE-M12A4-A |
| Starting System | |
| Normal engine cranking speed | 140-220 RPM |
| Starter motor no load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-220 amps |
| Starter motor maximum load current draw | 800 amps |
| Starter motor minimum stall torque (at 5 volts) | 14.7 Nm (10.8 lb-ft) |
| Starting circuit maximum voltage drop (engine at normal operating temperature) | 0.5 volt |
| Engine Ignition | |
| Base ignition timing | 10 degrees BTDC +/- 2 degrees non-adjustable |
| Firing order | 1-3-7-2-6-5-4-8 |
| Spark plug gap | 1.32-1.42 mm |
| Spark plug type | AWSF-32EM |