lemon-mirror:
Home >> Lincoln >> 2008 >> Navigator 4WD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal And Installation

Removal And Installation

  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  3. Disconnect the 2 PCM electrical connectors.
  4. Remove the 2 bolts and the ground cable.
    • To install, tighten to 7 Nm (62 lb-in).
  5. Remove the PCM.
  6. To install, reverse the removal procedure.
· About lemon-mirror