lemon-mirror:
Home >> Lincoln >> 2018 >> Navigator Select, RWD >> Repair and Diagnosis >> Steering >> Electronic Steering >> EPAS Guided Routine Testing >> Pinpoint Tests >> Pinpoint Test BQ: PSCM DTC U2016 Control Module Main Software >> Pinpoint Test Purpose

Pinpoint Test Purpose

To verify PSCM DTC U2016 is present and provide diagnostics if DTC U2016 is currently active in the PSCM.

  1. BQ1: VERIFY THE PSCM DTC 
    • Ignition ON, engine OFF.
    • Clear the PSCM DTCs.
    • Ignition OFF.
    • Wait at least 90 seconds for the modules to completely shut off.
    • Ignition ON, engine running.
    • Carry out the PSCM self-test.
    • Is DTC U2016 present and active in the PSCM? 
      Yes No
      INSTALL a new EPAS gear.
      REFER to POWER STEERING SYSTEM .
      ORDER a replacement EPAS gear and INCLUDE the RVC on the form.
      If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.      		 If the PSCM does not list DTC U2016, DISCONTINUE this test and REFER to the DTC Chart for direction.
· About lemon-mirror