Trouble Shooting: Notes
NOTE:
If both mirrors are inoperative, begin testing at step 1). If one mirror is inoperative, begin testing at step 3).
- Turn ignition on. Check FUSE PNL fuse (7.5-amp). If fuse is blown, replace fuse (repair wiring if necessary). If fuse is okay, measure voltage at Light Green/Yellow wire terminal of power mirror switch connector. If battery voltage does not exist, repair Light Green/Yellow wire between fuse and power mirror switch.
- If battery voltage exists, disconnect power mirror switch connector. Check continuity between ground and Black wire terminal of power mirror switch connector. If continuity does not exist, repair Black wire between power mirror switch and ground. If continuity exists, go to next step.
- Disconnect power mirror switch connector. Apply battery voltage between Yellow wire terminal and specified wire terminal of power mirror switch connector. See POWER MIRROR CIRCUIT TEST . If power mirrors operate, replace power mirror switch. If power mirrors do not operate, check wiring between power mirror switch and power mirror motor. If wiring is okay, replace power mirror assembly.