No-Load Test
Remove starter. Connect fully-charged 12-volt battery, voltmeter and ammeter to starter. See Figure . Using remote starter wires or jumper, engage solenoid. Starter should spin smoothly. Compare readings with specifications. See NO-LOAD TEST SPECIFICATIONS table. If voltage is less than specified or amperage is more than specified, repair or replace as necessary.
NO-LOAD TEST SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Millenia, MPV, 626 | ||||
| Voltage (Minimum) | 11 | |||
| Amperage (Maximum) | 90 | |||
| Protege | ||||
| 1.5L | ||||
| Denso Starter | ||||
| Voltage (Minimum) | 11 | |||
| Amperage (Maximum) | 50 | |||
| Mitsubishi Starter | ||||
| Voltage (Minimum) | 11 | |||
| Amperage (Maximum) | 60 | |||
| 1.8L | ||||
| Voltage (Minimum) | 11 | |||
| Amperage (Maximum) | 90 | |||