lemon-mirror:
Home >> Mazda >> 1998 >> 626 ES, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Interior Trim) >> Trunk Mat Removal/Installation

Trunk Mat Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  2. Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove the fasteners A and bolts, then remove the tool box.
    Fig 1: Removing Tool Box
    G01344530Courtesy of MAZDA MOTORS CORP.
  4. Remove the fasteners B, then remove the trunk mat.
  5. Install in the reverse order of removal.
    Fig 2: Removing/Installing Trunk Mat
    G01344531Courtesy of MAZDA MOTORS CORP.
· About lemon-mirror