lemon-mirror:
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Charging System) >> Generator Removal/Installation

Generator Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • When the battery cables are connected, touching the vehicle body with generator terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.
  1. Disconnect the negative battery cable.
  2. Remove the drive belt. (See DRIVE BELT REPLACEMENT .)
  3. Remove the front pipe. (See EXHAUST SYSTEM REMOVAL/INSTALLATION .)
  4. Remove the joint shaft. (See JOINT SHAFT REMOVAL/INSTALLATION .)
  5. Remove in the order indicated in the table.
    Fig 1: Removing Generator Components In Order
    G03699956Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
· About lemon-mirror