Cruise Control Switch
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
Deactivate air bag system. See AIR BAG RESTRAINT SYSTEMS article in RESTRAINTS. Remove driver's side air bag. Disconnect 3-pin cruise control switch harness connector. Check resistance between specified terminals of cruise control switch with switch in specified position. See CRUISE CONTROL SWITCH TEST table. See Fig 1 . If resistance is not as specified, replace cruise control switch.
CRUISE CONTROL SWITCH TEST
| Switch Position | Terminals | Specification |
|---|---|---|
| CRUISE MAIN | A & C | Zero Ohms |
| OFF | A & B | Zero Ohms |
| SET/COAST | A & B | 240 Ohms |
| RESUME/ACCEL | A & B | 910 Ohms |