lemon-mirror:
Home >> Mazda >> 2002 >> B4000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Lighting System) >> Panel Light Control Switch Inspection >> Notes

Panel Light Control Switch Inspection: Notes

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the panel light control switch without disconnecting the connector. (See PANEL LIGHT CONTROL SWITCH REMOVAL/INSTALLATION .)
  2. Measure the voltage at the panel light control switch terminals as indicated below.
  3. Disconnect the panel light control switch connector and inspect for continuity at terminal G.
    • If not as specified, inspect the parts listed under "Action."
    • If the parts and wiring harnesses are okay but the system still does not work properly, replace the panel light control switch.
· About lemon-mirror