lemon-mirror:
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls [Basic Diagnostic Procedures] >> Idle Speed & Ignition Timing

Idle Speed & Ignition Timing

Connect scan tool to DLC-2. Ensure idle speed and base ignition timing are set to specification. See IDLE SPEED SPECIFICATIONS  and IGNITION TIMING SPECIFICATIONS  tables. If adjustment is necessary, see ON-VEHICLE ADJUSTMENTS article.

IDLE SPEED SPECIFICATIONS

Application Man. Trans. RPM (1) Auto. Trans. RPM
B2300 800-950 800-950
B3000 760-800 880-920
B4000 760-800 760-830
Mazda6
2.3L 600-700 650-750
3.0L 700-800 700-800
Miata (2) 750-850 750-850
MPV N/A 700-800
Protege & Protege5 (2) 650-750 650-750
Tribute
2.0L 800-900 N/A
3.0L N/A 730-750
(1) Place automatic transaxle/transmission in Park.
(2) Connect a jumper wire between terminals TEN and GND at DLC-1. See Figure.
IGNITION TIMING SPECIFICATIONS (Degrees BTDC @ RPM)

Application Man. Trans. (1) Auto. Trans.
B2300 & B3000 10 @ Idle 10 @ Idle
B4000 (2) (2)
Mazda6
2.3L 8 @ Idle 8 @ Idle
3.0L 10 @ Idle 10 @ Idle
Miata 6-18 @ 750-850 6-18 @ 750-850
MPV (3) N/A 4-16 @ 700-800
Protege & Protege5 6-18 @ 650-750 6-18 @ 650-750
Tribute
2.0L 8-12 @ Idle N/A
3.0L N/A (2)
(1) Place automatic transaxle/transmission in Park.
(2) Information is not available from manufacturer.
(3) Connect a fused jumper wire between terminals TEN and GND of DLC-1. See Figure.
· About lemon-mirror