lemon-mirror:
Home >> Mazda >> 2003 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection

Buckle Switch Inspection

  1. Disconnect the negative battery cable.
  2. Disconnect the buckle switch connector.
  3. Inspect for continuity between the seat belt switch terminals using an ohmmeter.
    • If not as specified, replace the buckle.
    Fig 1: Terminal Continuity Table
    G01907958Courtesy of MAZDA MOTORS CORP.
    Fig 2: Inspecting Continuity Between Seat Belt Switch Terminals
    G01907959Courtesy of MAZDA MOTORS CORP.
· About lemon-mirror