lemon-mirror:
Home >> Mazda >> 2005 >> 3 i, Automatic >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Input/Output Check Mode >> Check Code Inspection >> Check code 08

Check code 08

CHECK CODE 08

Check code 08 TNS relay ON/OFF signal
STEP INSPECTION CONDITION DISPLAY ACTION
1 Turn the headlight switch to the TNS position. (TNS relay ON) ON Go to the next step.
OFF Verify that the voltage of instrument cluster terminal 1 L is B+.
  • If the voltage is as specified, replace the instrument cluster.
  • If the voltage is not as specified, inspect the following parts:
    • TNS relay
    • Wiring harness (Battery - TNS relay - instrument cluster)
2 Turn the headlight switch off. (TNS relay OFF) ON Verify that the voltage of the instrument cluster terminal 1 L is 1.0 V or less  .
  • If the voltage is as specified, replace the instrument cluster.
  • If the voltage is not as specified, inspect the following parts:
    • TNS relay
    • Wiring harness (TNS relay - instrument cluster)
OFF Input signal to the instrument cluster is normal.
· About lemon-mirror