lemon-mirror:
Home >> Mazda >> 2006 >> 6 Mazdaspeed >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System L3 With TC) >> After Repair Procedure

After Repair Procedure

  1. Connect the WDS or equivalent.
  2. Cycle the ignition switch from the off to the ON position.
  3. Any retrieved DTCs.
  4. Clear all diagnostic data using the WDS or equivalent.
    Fig 1: Locating DLC-2 Connector
    G04324072Courtesy of MAZDA MOTORS CORP.
· About lemon-mirror