Instrument Cluster Configuration
NOTE:
The odometer data (total traveled distance) in the previous instrument cluster is automatically transferred to a new instrument cluster during the configuration.
- Connect the SST M-MDS to the DLC-2.
- After set up the M-MDS (including the vehicle recognition), the following can be selected from the M-MDS screen.
Using an IDS (laptop PC):
- "Module Programming"
Using a PDS (Pocket PC):
- "Programming", "Module Programming"
- Select "PROGRAMMABLE MODULE INSTALLATION".
- Select "IC" and perform procedures according to directions on the M-MDS screen.
- Retrieve DTCs using the SST
M-MDS, then verify that there is no DTC present.
- If DTC is present, perform applicable DTC inspection.