lemon-mirror:
Home >> Mazda >> 2007 >> B2300 Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator On Vehicle Testing >> Load Test

Load Test

  1. Switch the battery tester to the ammeter function.
  2. Connect the positive and negative leads of the battery tester to the corresponding battery terminals.
  3. Connect the current probe to the generator B+ output lead (B/O) wire.
  4. With the engine running at 2,000 RPM, adjust the battery tester load bank to determine the output of the

    generator. See CHARGING SYSTEM COMPONENT TESTS .

· About lemon-mirror