lemon-mirror:
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Key-In-Ignition Warning Switch >> Removal and Installation

Removal and Installation

  1. Remove the ignition lock cylinder. See IGNITION LOCK CYLINDER - FUNCTIONAL or see IGNITION LOCK CYLINDER - NON FUNCTIONAL .
    Fig 1: Removing Key-In-Ignition Warning Switch
    G04310579Courtesy of MAZDA MOTORS CORP.
  2. Remove the key-in-ignition warning switch.
    1. Pry the clip downward.
    2. Release the key-in-ignition warning switch from the rear of the ignition lock cylinder.
  3. To install, reverse the removal procedure.
· About lemon-mirror