Pcm Configuration
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
- Select the "Module Programming".
- When using the PDS (Pocket PC)
- Select "Programming".
- Select "Module Programing".
- Then, select the "Programmable Module Installation" and "PCM" from the screen menu.
- Select "PCM" and perform procedures according to directions on the M-MDS screen.
- Retrieve DTCs using the M-MDS, then verify if DTCs are present.
NOTE:
- If a DTC is present, perform the applicable DTC inspection.
Courtesy of MAZDA MOTORS CORP.