lemon-mirror:
Home >> Mazda >> 2008 >> Tribute s Touring, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Except Hybrid >> Powertrain Control Module (Pcm) - 2.3L Removal/Installation >> Installation

Powertrain Control Module (Pcm) - 2.3L Removal/Installation: Installation

  1. Install the PCM cowl seal.
  2. Install the PCM and the 2 stud bolts.
    • Tighten to 6 N.m {0.6 kgf.m, 53 in.lbf}.
  3. Connect the 3 PCM electrical connectors.
  4. Position the wiring harness and install the PCM stud bolt nut.
    • Tighten to 6 N.m {0.6 kgf.m, 53 in.lbf}.
  5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. See PROGRAMMABLE MODULE INSTALLATION .
  6. Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. See KEY PROGRAMMING USING TWO PROGRAMMED KEYS .
· About lemon-mirror