Rear Wheel Alignment: Notes

REAR WHEEL ALIGNMENT [LF AND L3] (UNLOADED)⁽¹⁾

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full

Total toe-in

Tire [Tolerance ±4 {±0.16}]

(mm {in})

2 {0.08}

Rim inner

1±3 {0.04±0.12}

(degree)

0°11'±0°22'

Camber angle⁽²⁾ (Reference value) [Tolerance ±1°]

-1°20'

-1°21'

-1°23'

-1°25'

-1°27'

Thrust angle (Reference value) [Tolerance ±0°48']

0°

⁽¹⁾	Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.

⁽²⁾	Difference between left and right must not exceed 1°30'.

REAR WHEEL ALIGNMENT [L3 WITH TC] (UNLOADED)⁽¹⁾

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full

Total toe-in

Tire [Tolerance ±4 {±0.16}]

(mm {in})

2 {0.08}

Rim inner

1±3 {0.04±0.12}

(degree)

0°11'±0°22'

Camber angle⁽²⁾ (Reference value) [Tolerance ±1°]

-1°36'

-1°37'

-1°39'

-1°40'

-1°42'

Thrust angle (Reference value) [Tolerance ±0°48']

0°

⁽¹⁾	Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.

⁽²⁾	Difference between left and right must not exceed 1°30'.

NOTE: Total toe-in measuring position

Tire: A indicated in the figure (between the center of the tires)
Rim inner: B indicated in the figure (between the inner side of the rims)

Fig 1: Identifying Total Toe-In Measuring Position
Courtesy of MAZDA MOTORS CORP.