lemon-mirror:
Home >> Mazda >> 2009 >> Tribute s Touring, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Powertrain Control Module (Pcm) Removal/Installation - 3.0L >> Installation

Powertrain Control Module (Pcm) Removal/Installation - 3.0L: Installation

  1. Install the PCM cowl seal.
  2. Install the PCM and the 2 bolts.
    • Tighten to 6 N.m {0.6 kgf.m, 53 in.lbf}.
  3. Connect the 3 PCM electrical connectors.
  4. Attach the wiring harness retainer to the cowl stud bolt.
    • Tighten to 6 N.m {0.6 kgf.m, 53 in.lbf}.
  5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. See PROGRAMMABLE MODULE INSTALLATION (PMI) .
  6. Reprogram the passive anti-theft system (PATS). Carry out the Parameter Reset procedure. See KEY PROGRAMMING USING TWO PROGRAMMED KEYS .
· About lemon-mirror