lemon-mirror:
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Y, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC System Inspection >> Preparation

DSC System Inspection: Preparation

  1. Verify that the battery is fully charged.
  2. Switch the ignition to ON and verify that the ABS warning light goes out after approx. 3.0 s. 
  3. Switch the ignition to off.
  4. Jack up the vehicle and support it evenly on safety stands.
  5. Shift to the N position.
  6. Verify that all four wheels rotate.
  7. Rotate the inspected wheels by hand and verify there is no brake drag.
    • If there is any brake drag, perform regular brake inspection.
    • if there is no brake drag, perform DSC HU/CM operation inspection.
· About lemon-mirror