Pcm Temperature Sensor Inspection
CAUTION:
- The PCM temperature sensor cannot be removed as a single unit. When replacing the PCM temperature sensor, replace it together with the PCM as a single unit.
- Connect the M-MDS to the DLC-2.
- Turn the ignition switch to the ON position.
- Select PCM_T on the M-MDS.
- Verify that the PCM_T PID temperature is within the specification.
- If not as verified, replace the PCM. (See PCM REMOVAL/INSTALLATION .)
PCM temperature sensor specification
-30-110°C {-22-230°F}