lemon-mirror:
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC Off Switch Inspection

DSC Off Switch Inspection

  1. Remove the DSC OFF switch. (See DSC OFF SWITCH REMOVAL/INSTALLATION ).
  2. Verify that the continuity between the DSC OFF switch terminals is as indicated in the table.
    • If not as indicated in the table, replace the DSC OFF switch.
  3. Apply battery voltage to DSC OFF switch terminal E, and connect terminal A to ground.
  4. Verify that the LED illuminates.
    • If there is any malfunction, replace the DSC OFF switch.
      Fig 1: DSC OFF Switch Terminals Continuity Chart
      G06205596Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying DSC OFF Switch Connector Terminals
      G06733281Courtesy of MAZDA MOTORS CORP.
· About lemon-mirror