lemon-mirror:
Home >> Mazda >> 2011 >> 6 i Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Inspection >> Notes

DSC HU/Cm Inspection: Notes

  1. Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION .)
  2. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .) (See BATTERY REMOVAL/INSTALLATION [MZI 3.7 V6] .)
  3. Attach the tester lead to the DSC HU/CM wiring harness-side connector, then inspect the voltage, continuity, or resistance according to the standard (reference) on the table.
· About lemon-mirror