Engine Control System Operation Inspection: Specification: Notes

Accelerator pedal released:
- APP1: Approx. 0.4 V
- APP2: Approx. 0.4 V
Accelerator pedal depressed:
- APP1: Approx. 3.4 V
- APP2: Approx. 3.4 V
If not as specified, inspect for the following harnesses and connectors:
- APP sensor terminal A-PCM terminal 1W
- APP sensor terminal B-PCM terminal 1AP
- APP sensor terminal C-PCM terminal 1AV
- APP sensor terminal D-PCM terminal 1AS
- APP sensor terminal E-PCM terminal 1AO
- APP sensor terminal F-PCM terminal 1AL
  - If there is no malfunction, replace the accelerator pedal. (See ACCELERATOR PEDAL REMOVAL/INSTALLATION .)