lemon-mirror:
Home >> Mazda >> 2013 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Windshield Removal >> Notes

Windshield Removal: Notes

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  2. Remove the following parts:
    1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION ).
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION ).
    3. Rain sensor (with auto light/wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION ).
    4. Auto-dimming mirror (with auto-dimming mirror) (See AUTO-DIMMING MIRROR REMOVAL/INSTALLATION ).
    5. Rearview mirror (without auto-dimming mirror) (See REARVIEW MIRROR REMOVAL/INSTALLATION ).
    6. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION ).
    7. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION ).
    8. Front map light (See MAP LIGHT REMOVAL/INSTALLATION ).
    9. Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION ).
  3. Set the headliner out of the way.
  4. Apply protective tape along the edge of the body.
    NOTE:
    • Overlap and adhere the protective tape to the corners to prevent damage.
  5. Remove the windshield molding by pulling it outward.
    NOTE:
    • If the windshield molding is difficult to remove, warm the windshield molding using a hot air blower.
    • The windshield molding is a replacement part.
    Fig 1: Identifying Protective Tape Application Area
    G09076674
· About lemon-mirror