lemon-mirror:
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Lock System >> Request Switch Inspection >> Liftgate

Request Switch Inspection: Liftgate

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the following parts:
    1. Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION .)
    2. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    3. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    4. Liftgate recess (See LIFTGATE RECESS REMOVAL/INSTALLATION .)
    5. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    6. Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION .)
    7. Request switch (liftgate) (See REQUEST SWITCH REMOVAL/INSTALLATION .)
  3. Verify that the continuity is as indicated in the table.
    Fig 1: Request Switch Continuity Reference Chart (Driver Side)
    G09772041Courtesy of MAZDA MOTORS CORP.
    Fig 2: Verifying Continuity Of Request Switch (Driver Side)
    G09761469Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the request switch.
· About lemon-mirror