lemon-mirror:
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Lock System >> Start Stop Unit Removal/Installation >> Start Stop Unit Installation Note

Start Stop Unit Installation Note

  1. Temporarily install the start stop unit to the steering shaft using new start stop unit installation bolts.
  2. Tighten the start stop unit installation bolts until the heads break off.
    Fig 1: Tightening Start Stop Unit Installation Bolts
    G09075666Courtesy of MAZDA MOTORS CORP.
· About lemon-mirror