Check Code 06

Inspection item	Step	Inspection condition	Display	Action
Ignition switch ON/OFF input signal	1	Switch ignition to ON	Courtesy of MAZDA MOTORS CORP.	The input signal is normal. Go to the next step.
	1	Switch ignition to ON	Courtesy of MAZDA MOTORS CORP.	Go to Step 3.
	2	Switch ignition to ACC	Courtesy of MAZDA MOTORS CORP.	Go to Step 4.
	2	Switch ignition to ACC	Courtesy of MAZDA MOTORS CORP.	The input signal to the information display is normal.
	3	Inspect the information display. Measure the voltage at information display terminal E. (See INFORMATION DISPLAY INSPECTION .) Is the voltage B+?		Yes	Replace the information display.
	3			No	Inspect for an open or short circuit in the ignition related wiring harness, poor connection or terminal disconnection of the connector. If there is any malfunction, repair or replace the malfunctioning location.
	4	Inspect the information display. Measure the voltage at information display terminal E. (See INFORMATION DISPLAY INSPECTION .) Is the voltage 1.0 V or less?		Yes	Replace the information display.
	4			No	Inspect for an open or short circuit in the ignition related wiring harness, poor connection or terminal disconnection of the connector. If there is any malfunction, repair or replace the malfunctioning location.