lemon-mirror:
Home >> Mazda >> 2016 >> 5 GS, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake Air System >> Intake-Air System Removal/Installation >> Throttle Body Installation Note

Throttle Body Installation Note

  1. Temporarily tighten the throttle body to the intake manifold.
  2. Tighten the installation bolts in the order shown in the figure.
    Fig 1: Throttle Body Bolts Tightening Sequence
    G13726701Courtesy of MAZDA MOTORS CORP.

    Throttle body tightening torque 

    8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}

  3. Remove the plug from the engine coolant hose and install the water hose to the throttle body quickly.
· About lemon-mirror