lemon-mirror:
Home >> Mazda >> 2017 >> CX-5 Grand Select, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Systems >> Main Fuse Removal/Installation

Main Fuse Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure.
    Fig 1: Inserting Tape-Wrapped Flathead Screwdriver Into Service Hole Position
    G11426327Courtesy of MAZDA MOTORS CORP.
  3. Move the flathead screwdriver in the direction of the arrow (1) shown in the figure, pull up the main fuse cover in the direction of the arrow (2) shown in the figure, and detach the main fuse cover tab from the main fuse.
    Fig 2: Moving Main Fuse Flathead Screwdriver
    G09077799Courtesy of MAZDA MOTORS CORP.
  4. Remove the main fuse cover.
    Fig 3: Removing Main Fuse Cover
    G09077800Courtesy of MAZDA MOTORS CORP.
  5. Remove the nuts.
    Fig 4: Removing Main Fuse Nuts
    G11426330Courtesy of MAZDA MOTORS CORP.
  6. Remove the main fuse.
  7. Install in the reverse order of removal.
· About lemon-mirror