lemon-mirror:
Home >> Mazda >> 2017 >> CX-9 Signature >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Timing Chain Removal/Installation >> Engine Front Cover Removal Note

Engine Front Cover Removal Note

  1. Remove the bolts shown in the figure and set the wiring harness bracket aside.
    Fig 1: Wiring Harness Bracket, Bolts And Engine Front Cover
    G11436818Courtesy of MAZDA MOTORS CORP.
  2. Remove the engine front cover installation bolts.
  3. Using a screwdriver wrapped in a cloth, peel the sealant away a little at a time, and remove the engine front cover.
CAUTION:
  • Do not apply excessive force to the screwdriver. Otherwise, the engine front cover could be damaged.
  • Be careful not to scratch or damage the seal surface. Otherwise, it could cause oil leakage.
Fig 2: Removing Engine Front Cover Using Screwdriver (1 Of 2)
G11436819Courtesy of MAZDA MOTORS CORP.
Fig 3: Removing Engine Front Cover Using Screwdriver (2 Of 2)
G11436820Courtesy of MAZDA MOTORS CORP.
· About lemon-mirror