lemon-mirror:
Home >> Mazda >> 2018 >> 3 Touring, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Sensor Cover Removal/Installation

Sensor Cover Removal/Installation

  1. Pull the sensor cover A in the direction of the arrow shown in the figure and detach the tab A of the sensor cover A and sensor cover B.
    Fig 1: Detaching Tab A Of Sensor Cover A And Sensor Cover B
    G11449109Courtesy of MAZDA MOTORS CORP.
  2. Pull the sensor cover A in the direction of the arrow shown in the figure, detach the tab B and pin A for the sensor cover A and the base, and remove the sensor cover A from the base.
  3. Remove the wiring harness from the hook.
    Fig 2: Removing Wiring Harness
    G11449110Courtesy of MAZDA MOTORS CORP.
  4. Pull the sensor cover B in the direction of the arrow shown in the figure, detach the tab and pin for the sensor cover B and the base, and remove the sensor cover B from the base.
  5. Install in the reverse order of removal.
· About lemon-mirror