lemon-mirror:
Home >> Mazda >> 2018 >> 6 Signature >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Indicator Unit Removal/Installation

Indicator Unit Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the sensor cover. (See SENSOR COVER REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Indicator Unit And Connector
    G12237625Courtesy of MAZDA MOTORS CORP.
  4. Move the indicator unit in the direction of the arrow shown in the figure below and remove it.
    Fig 2: Moving Indicator Unit
    G12237626Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
· About lemon-mirror