lemon-mirror:
Home >> Mazda >> 2018 >> CX-9 Signature >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System (Service Information) >> DSC HU/Control Module Removal/Installation >> DSC HU/Control Module Connector Installation Note

DSC HU/Control Module Connector Installation Note

  1. Connect the connector and pull the lock lever up in the direction of the arrow.
    Fig 1: Connecting Lock Lever Of DSC HU/Control Module Connector
    G11433113Courtesy of MAZDA MOTORS CORP.
  2. After connecting the connector, verify that the connector cover is completely pushed in.
· About lemon-mirror