lemon-mirror:
Home >> Mazda >> 2018 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generator Disassembly/Assembly >> Brush Disassembly Note

Brush Disassembly Note

CAUTION:
  • Melt the solder quickly, otherwise the diodes (rectifier) and brush holder will be damaged by excessive heat.
Fig 1: Identifying Brush Holder And Soldered Area
G11274118Courtesy of MAZDA MOTORS CORP.
  1. Melt the solder and remove the brush from the brush holder.
· About lemon-mirror