Manual Open/close Function Inspection

With auto-open/close function for driver-side window

BASIC POWER WINDOW SYSTEM INSPECTION DESCRIPTION

Step	Inspection		Action
1	Switch the ignition ON (engine off or on). Operate the power window using the manual open/close function on the power window main switch. Does each door glass open/close simultaneously with the switch operation?	Yes	Go to the next step.
1		No	Inspect the power window main switch and the wiring harness. Repair or replace malfunctioning parts.
2	Set the power cut switch to the UNLOCK (contact point: Close) position. Operate the power window using the power window sub-switch. Does the door glass open/close simultaneously with the switch operation?	Yes	Go to the next step.
2		No	Inspect the power window sub-switch and the wiring harness. Repair or replace malfunctioning parts.
3	Set the power cut switch to the LOCK (contact point: Open) position. Operate all power windows other than the driver-side. Does the door glass open/close?	Yes	Inspect the power cut switch and the wiring harness. Replace the power window main switch.
3		No	Manual open/close function is normal. Perform the auto open/close function inspection.

With auto-open/close function for all windows

BASIC POWER WINDOW SYSTEM INSPECTION DESCRIPTION

Step	Inspection		Action
1	Switch the ignition ON (engine off or on). Turn the power-cut switch to UNLOCK (contact point: Close). Does each door glass move up and down in manual mode using the power window sub switch?	Yes	Go to the next step.
1		No	Inspect the following items: Power window main switch (power-cut switch system malfunction) Power window sub switch power supply fuses Power window sub switch ground wiring harness Power window sub switch power supply wiring harnesses Wiring harness between power window sub switch and power window motor Power window sub switch Power window motor Repair or replace the malfunctioning part, then go to the next step.
2	Does the driver-side door glass move up and down in manual mode using the power window main switch?	Yes	Go to the next step.
2		No	Inspect the following items: Power window main switch power supply fuses Power window main switch ground wiring harness Power window main switch power supply wiring harnesses Wiring harness between power window main switch and power window motor Power window main switch Repair or replace the malfunctioning part, then go to the next step.
3	Does each other door glass other than the driver-side door glass move up and down in manual mode using the power window main switch?	Yes	Go to the next step.
3		No	Perform the power window initialization procedure for any door glass that does not move up and down, and reinspect. (See POWER WINDOW SYSTEM INITIALIZATION PROCEDURE .) If it does not move up and down upon re-inspection, inspect the following: Wiring harness between power window main switch and sub-switch Repair or replace the malfunctioning part, then go to the next step.
4	Turn the power-cut switch to LOCK (contact point: Open). Push/pull the power window main switch (switches for all windows in manual mode). Does only driver-side front door glass move up and down?	Yes	Manual open/close function is normal. Go to the automatic mode function inspection.
4		No	Replace the power window main switch, then go to the automatic mode function inspection. (power-cut switch system malfunction)